26

Re: Вторая жизнь таблетки

Эх, если напишите, буду очень рад. Единственное чего мне  не хватает.

27

Re: Вторая жизнь таблетки

Пните меня ближе через несколько дней, пожалуйста, чтобы я не забыл

N̶8̶0̶0̶ + N̶8̶1̶0̶ + N̶9̶0̶0̶ + N̶9̶5̶0̶ + N̶9̶ ̶C̶y̶a̶n̶ + N̶9̶ ̶B̶l̶a̶c̶k̶

28

Re: Вторая жизнь таблетки

спасибо! пну обязательно, т.к. очень нужна эта фенечка.

29

Re: Вторая жизнь таблетки

Mitrandir, добрый день, как у вас со временем?

30

Re: Вторая жизнь таблетки

Привет, пока не очень, я уехал из города до вторника. Постараюсь во вторник заняться.

N̶8̶0̶0̶ + N̶8̶1̶0̶ + N̶9̶0̶0̶ + N̶9̶5̶0̶ + N̶9̶ ̶C̶y̶a̶n̶ + N̶9̶ ̶B̶l̶a̶c̶k̶

31

Re: Вторая жизнь таблетки

roll

32

Re: Вторая жизнь таблетки

Да-да, забыл совсем smile  Постараюсь сегодня начать

N̶8̶0̶0̶ + N̶8̶1̶0̶ + N̶9̶0̶0̶ + N̶9̶5̶0̶ + N̶9̶ ̶C̶y̶a̶n̶ + N̶9̶ ̶B̶l̶a̶c̶k̶

33

Re: Вторая жизнь таблетки

smile

34

Re: Вторая жизнь таблетки

Я дико извиняюсь, но пока никак не получается найти время sad
У меня тут полный аврал

N̶8̶0̶0̶ + N̶8̶1̶0̶ + N̶9̶0̶0̶ + N̶9̶5̶0̶ + N̶9̶ ̶C̶y̶a̶n̶ + N̶9̶ ̶B̶l̶a̶c̶k̶

35

Re: Вторая жизнь таблетки

ясно, буду надеятся.

36 Отредактировано Tamik (14-08-2013 17:05:32)

Re: Вторая жизнь таблетки

как отключить красный светодиод

Nokia n810 Maemo OS2008 5.2010.33-1

37

Re: Вторая жизнь таблетки

Это который горит когда активна камера?
Править /etc/mce.ini. Форматов я уже не помню, но если пришлёте мне mce.ini, попробую разобраться.

N̶8̶0̶0̶ + N̶8̶1̶0̶ + N̶9̶0̶0̶ + N̶9̶5̶0̶ + N̶9̶ ̶C̶y̶a̶n̶ + N̶9̶ ̶B̶l̶a̶c̶k̶

38

Re: Вторая жизнь таблетки

да, именно тот,я сделал все как в этой теме все работает.но для шпионства неплохо бы отрубить светодиод smile

Nokia n810 Maemo OS2008 5.2010.33-1

39

Re: Вторая жизнь таблетки

Пришлите свой /etc/mce.ini
Или попробуйте сами в нём разобраться, там куча комментариев внутри

N̶8̶0̶0̶ + N̶8̶1̶0̶ + N̶9̶0̶0̶ + N̶9̶5̶0̶ + N̶9̶ ̶C̶y̶a̶n̶ + N̶9̶ ̶B̶l̶a̶c̶k̶

40 Отредактировано Tamik (16-08-2013 22:23:18)

Re: Вторая жизнь таблетки

[spoiler]

# Configuration file for MCE

[Modules]

# Path to modules
#
# Do not modify unless you're sure that you know what you're doing!
ModulePath=/usr/lib/mce/modules

# Modules
#
# List of modules to load
# Note: the name should not include the "lib"-prefix
Modules=homekey;battery;filter-brightness-als;inactivity;camera;alarm


[HomeKey]

# Try to make this possible somehow
# [HomeKey] keycode
# HomeKeyCode=Key_F5

# Timeout before keypress is regarded as a long press
#
# Timeout in milliseconds, default 800
HomeKeyLongDelay=800

# Short [Home] behaviour
#
# Valid options:
# disabled - do nothing on short press
# shortsignal - send the short home D-Bus signal <default>
# longsignal - send the long home D-Bus signal
HomeKeyShortAction=shortsignal

# Long [Home] behaviour
#
# Valid options:
# disabled - do nothing on short press
# shortsignal - send the short home D-Bus signal
# longsignal - send the long home D-Bus signal <default>
HomeKeyLongAction=longsignal


[PowerKey]

# Timeout before keypress is regarded as a medium press
# This delay is used when powering up from charging
#
# Timeout in milliseconds, default 1000
PowerKeyMediumDelay=1000

# Timeout before keypress is regarded as a long press
#
# Timeout in milliseconds, default 1500
PowerKeyLongDelay=1500

# Timeout for double keypresses
#
# Timeout in milliseconds, default 1000
PowerKeyDoubleDelay=1000

# Short [power] behaviour
#
# WARNING:
# Setting short, long, and double press to disabled will make it
# near impossible to turn off your device without removing the battery!
#
# Valid options:
# disabled - do nothing on short press
# menu - show device menu <default>
# poweroff - shutdown device
# softpoweroff - enter soft poweroff mode
PowerKeyShortAction=menu

# Long [power] behaviour
#
# Valid options:
# disabled - do nothing on long press
# menu - show the device menu
# poweroff - shutdown device <default>
# softpoweroff - enter soft poweroff mode
PowerKeyLongAction=poweroff

# Double press [power] behaviour
#
# Valid options:
# disabled - do nothing on double press <default>
# menu - show the device menu
# poweroff - shutdown device
# softpoweroff - enter soft poweroff mode
PowerKeyDoubleAction=disabled


[SoftPowerOff]

# Connectivity policy with charger connected
#
# Valid options:
# forceoffline - always go to offline
# softoffline - offline only if there are no open connections
# retain - do not change the network status <default>
ConnectivityPolicyCharger=retain

# Connectivity policy when running on battery
#
# Valid options:
# forceoffline - always go to offline <default>
# softoffline - offline only if there are no open connections
# retain - do not change the network status
ConnectivityPolicyBattery=forceoffline

# Connectivity policy when powering on from soft poweroff
# Note that this policy only affects the connectivity state
#
# Valid options:
# offline - stay offline <default>
# restore - restore state from before soft poweroff
ConnectivityPolicyPowerOn=offline


[DevLock]

# Note that the delays loop:
#
# DevLockDelay0 -> DevLockDelay1 -> DevLockDelay2 -> DevLockDelay3 ->
# DevLockDelay0 -> ...

# Delay to use before the user can input the device lock code
#
# Timeout in seconds, default 0 (no delay)
DevLockDelay0=0

# Delay to use 1st time user inputs an incorrect code
#
# Timeout in seconds, default 1
DevLockDelay1=1

# Delay to use 1st time user inputs an incorrect code
#
# Timeout in seconds, default 1
DevLockDelay2=1

# Delay to use 1st time user inputs an incorrect code
#
# Timeout in seconds, default 5
DevLockDelay3=5

# Time before the device shuts down automatically from
# the shutdown query (shown when cancel is pressed in device lock)
#
# Timeout in milliseconds, default 30000
DevLockShutdownTimeout=30000


[TKLock]

# Blank immediately instead of dim before blank when tklock is enabled
#
# 1 to blank immediately, 0 to dim before blanking
BlankImmediately=0

# Dim immediately instead of having a timeout before dimming
# when tklock is enabled
#
# 1 to dim immediately, 0 to wait for timeout
DimImmediately=0

# Timeout before dimming
#
# Timeout in milliseconds, default 3000
DimDelay=3000

# Disable touchscreen immediately instead
# of when the display is blanked
#
# 1 to disable immediately, 0 to wait until display is blanked
DisableTSImmediately=1

# Disable keypad immediately instead
# of when the display is blanked
#
# 1 to disable immediately, 0 to wait until display is blanked
DisableKPImmediately=0

# Unlock the tklock if the camera is popped out
#
# 1 to enable, 0 to disable
CameraPopoutUnlock=1


[KeyPad]

# Timeout before disabling keyboard backlight when unused
#
# Timeout in seconds, default 10
BacklightTimeout=10

# Fade time for keyboard backlight
#
# Timeout in milliseconds, default 100
BacklightFadeTime=100


[LED]

# List of patterns for the LED functionality
#
# A list of all pattern names that should be configured
LEDPatterns=PatternError;PatternDeviceOn;PatternPowerOn;PatternPowerOff;PatternCommunicationCall;PatternCommunicationChat;PatternCommunicationEmail;PatternCommonNotification;PatternWebcamActive;PatternBatteryCharging;PatternBatteryFull;PatternPsychedelia;PatternDeviceSoftOff


[LEDPatternMonoRX34]

# Patterns used if the device has a single-colour LED
# Please prefix pattern names with Pattern to avoid name space clashes
#
# Note: For power management purposes, remember to keep try to keep the
#       onPeriod relatively short (not shorter than 50ms though),
#       the offPeriod long; if this is not possible, make sure to have
#       a timeout for the pattern so that it goes off after 15-30 seconds
#
# Priority (0 - highest, 255 - lowest)
# ScreenOn - 0 only show pattern when the display is off
#            1 show pattern even when the display is on
#            2 only show pattern when the display is off, including acting dead
#            3 show pattern even when the display is on, including acting dead
#            4 only show pattern if the display is off, or if in acting dead
# Timeout in seconds before pattern is disabled, 0 for infinite
# OnPeriod time in milliseconds
# OffPeriod time in milliseconds
#      (0 for continuous light; ONLY when the charger is connected!)
# Intensity in steps from 0 (off) to 15 (full intensity)
PatternError=0;1;0;250;500;15
PatternDeviceOn=254;0;0;75;5000;10
PatternDeviceSoftOff=253;0;0;100;10000;5
PatternPowerOn=10;3;0;2000;1000;15
PatternPowerOff=9;3;0;2000;1000;15
PatternCommunicationCall=30;1;0;250;2000;15
PatternCommunicationChat=30;1;0;250;2000;15
PatternCommunicationEmail=30;1;0;250;2000;15
PatternCommonNotification=30;1;0;250;2000;15
PatternWebcamActive=255;0;0;0;0;0
PatternBatteryCharging=50;4;0;500;7500;10
PatternBatteryFull=40;4;0;1500;0;10

# This example pattern has a priority of 42 (all patterns with a *lower*
# priority value will have precedence), an on-period of 0.5 seconds,
# and an off-period of 1.5 seconds.  The pattern will be active for
# 30 seconds, then stop.  The brightness level will be 10 (with 15 being
# the maximum, this would amount to 66%.
# This pattern will be visible even when the display is on.
PatternExample=42;1;30;500;1500;10


[LEDPatternNJoyRX44]

# Patterns used if the device has an RGB LED connected to an NJoy controller
# Please prefix pattern names with Pattern to avoid name space clashes
#
# Priority (0 - highest, 255 - lowest)
# ScreenOn - 0 only show pattern when the display is off
#            1 show pattern even when the display is on
#            2 only show pattern when the display is off, including acting dead
#            3 show pattern even when the display is on, including acting dead
#            4 only show pattern if the display is off, or if in acting dead
# Timeout in seconds before pattern is disabled, 0 for infinite
# R-channel pattern in NJoy format (16 commands at most)
# G-channel pattern in NJoy format (16 commands at most)
# B-channel pattern in NJoy format (16 commands at most)
#
# 0000 -- Jump to the start of the pattern for the channel
# 40xx -- Set channel brightness
# xxyy -- Increment/decrement
#      xx determines the speed;
#         01-3f -- short step time (granularity 0.49ms)
#         41-7f -- long step time (granularity 15.6ms)
#      yy determines the increment/decrement steps
#         00-7f -- increment steps 00 = 0 steps, 7f = 127 steps
#         80-ff -- decrement steps 80 = 0 steps, ff = 127 steps
#
#         Use 0 steps to create pauses
#         Two consecutive increment/decrement sequences are needed
#         to cover the entire range from 0-255
# c000 -- End pattern execution
# e002 -- Send red trigger
# e004 -- Send green trigger
# e008 -- Send blue trigger
# e080 -- Wait for red trigger
# e100 -- Wait for green trigger
# e200 -- Wait for blue trigger
PatternError=0;1;0;40002000200040ff200020000000;0000;0000
PatternDeviceOn=254;0;0;4000205f20df7f007f007f007f000000;4000205f20df7f007f007f007f000000;4000205f20df7f007f007f007f000000
PatternDeviceSoftOff=253;0;0;4000203f20bf7f007f007f007f007f000000;4000203f20bf7f007f007f007f007f000000;0000
PatternPowerOn=10;3;0;4000207f207f01ff01ffc000;4000207f207f01ff01ffc000;4000207f207f01ff01ffc000
PatternPowerOff=9;3;0;4000017f017f36ff36ff7f00c000;4000017f017f36ff36ff7f00c000;4000017f017f36ff36ff7f00c000
PatternCommunicationCall=30;1;0;0000;0000;40007f00017f017f050001ff01ff0000
PatternCommunicationChat=30;1;0;0000;0000;40007f00017f017f050001ff01ff0000
PatternCommunicationEmail=30;1;0;0000;0000;40007f00017f017f050001ff01ff0000
PatternCommonNotification=30;1;0;0000;0000;40007f00017f017f050001ff01ff0000
PatternWebcamActive=20;1;0;4000027f027fc000;0000;0000
PatternBatteryCharging=50;4;0;0000;4000257f06ff7f0041000000;0000
PatternBatteryFull=40;4;0;0000;407f0000;0000
PatternPsychedelia=250;1;0;4000167f167f17ff17ff0000;40001300197f197f15ff15ff0000;4000237f237f130022ff22ff13000000

# This example pattern has a priority of 42 (all patterns with a *lower*
# priority value will have precedence), and will flash in yellow
# This pattern will be visible even when the display is on.
PatternExample=42;1;30;4000167f167f17ff17ff0000;4000167f167f17ff17ff0000;0000


[LEDPatternNJoyRX48]

# Patterns used if the device has an RGB LED connected to an NJoy controller
# Please prefix pattern names with Pattern to avoid name space clashes
#
# Priority (0 - highest, 255 - lowest)
# ScreenOn - 0 only show pattern when the display is off
#            1 show pattern even when the display is on
#            2 only show pattern when the display is off, including acting dead
#            3 show pattern even when the display is on, including acting dead
#            4 only show pattern if the display is off, or if in acting dead
# Timeout in seconds before pattern is disabled, 0 for infinite
# R-channel pattern in NJoy format (16 commands at most)
# G-channel pattern in NJoy format (16 commands at most)
# B-channel pattern in NJoy format (16 commands at most)
#
# 0000 -- Jump to the start of the pattern for the channel
# 40xx -- Set channel brightness
# xxyy -- Increment/decrement
#      xx determines the speed;
#         01-3f -- short step time (granularity 0.49ms)
#         41-7f -- long step time (granularity 15.6ms)
#      yy determines the increment/decrement steps
#         00-7f -- increment steps 00 = 0 steps, 7f = 127 steps
#         80-ff -- decrement steps 80 = 0 steps, ff = 127 steps
#
#         Use 0 steps to create pauses
#         Two consecutive increment/decrement sequences are needed
#         to cover the entire range from 0-255
# c000 -- End pattern execution
# e002 -- Send red trigger
# e004 -- Send green trigger
# e008 -- Send blue trigger
# e080 -- Wait for red trigger
# e100 -- Wait for green trigger
# e200 -- Wait for blue trigger
PatternError=0;1;0;40002000200040ff200020000000;0000;0000
PatternDeviceOn=254;0;0;e10040101d701d70e0041d001df01df0e00440007f007f007f007f000000;e00240024d0de08016004d8de08040007f007f007f007f000000;0000
PatternDeviceSoftOff=253;0;0;4000204f20cf7f007f007f007f007f000000;4000204f20cf7f007f007f007f007f000000;0000
PatternPowerOn=10;3;0;40101d701d700106e00401ff01ffc000;40024d0ee08001ff01ffc000;0000
PatternPowerOff=9;3;0;40f07f007f007f007f007f001d001df01df0e0044000c000;40107f007f007f007f007f0016004d004d8ee0804000c000;0000
PatternCommunicationCall=30;1;0;0000;0000;40007f00017f017f050001ff01ff0000
PatternCommunicationChat=30;1;0;0000;0000;40007f00017f017f050001ff01ff0000
PatternCommunicationEmail=30;1;0;0000;0000;40007f00017f017f050001ff01ff0000
PatternCommonNotification=30;1;0;0000;0000;40007f00017f017f050001ff01ff0000
PatternWebcamActive=20;1;0;4000027f027fc000;0000;0000
PatternBatteryCharging=50;4;0;0000;4000257f06ff7f0041000000;0000
PatternBatteryFull=40;4;0;0000;407f0000;0000
PatternPsychedelia=250;1;0;4000167f167f17ff17ff0000;40001300197f197f15ff15ff0000;4000237f237f130022ff22ff13000000

# This example pattern has a priority of 42 (all patterns with a *lower*
# priority value will have precedence), and will flash in yellow
# This pattern will be visible even when the display is on.
PatternExample=42;1;30;4000167f167f17ff17ff0000;4000167f167f17ff17ff0000;0000

[/spoiler]

Nokia n810 Maemo OS2008 5.2010.33-1

41

Re: Вторая жизнь таблетки

Попробуйте заменить так:

PatternWebcamActive=20;1;0;0000

Если у вас N810, то в секции [LEDPatternNJoyRX44], если N810WiMax, то в секции [LEDPatternNJoyRX48]. Для гарантии можно в обеих.

N̶8̶0̶0̶ + N̶8̶1̶0̶ + N̶9̶0̶0̶ + N̶9̶5̶0̶ + N̶9̶ ̶C̶y̶a̶n̶ + N̶9̶ ̶B̶l̶a̶c̶k̶

42

Re: Вторая жизнь таблетки

пытаюсь измененный файл скопировать обратно в директорию но мне не дает пишет доступ запрещен

Nokia n810 Maemo OS2008 5.2010.33-1

43

Re: Вторая жизнь таблетки

потому что из-под рута надо

N̶8̶0̶0̶ + N̶8̶1̶0̶ + N̶9̶0̶0̶ + N̶9̶5̶0̶ + N̶9̶ ̶C̶y̶a̶n̶ + N̶9̶ ̶B̶l̶a̶c̶k̶

44

Re: Вторая жизнь таблетки

а я через файловый менеджер хотел, через терминал незнаю как это сделать

Nokia n810 Maemo OS2008 5.2010.33-1

45

Re: Вторая жизнь таблетки

Спасибо большое все получилось smile  smile  smile

Nokia n810 Maemo OS2008 5.2010.33-1